All Messages

pipinos 15/05/2021
Κάνει αυτά που υπόσχεται. Νομίζω, έως τώρα, ότι ποιο έξυπνο σε εξάρτημα ράγας πίνακα με προστασία από διαρροή. Το δοκίμασα με φορτίο μια λυχνία πυρακτώσεως 60W. Λειτουργεί πολύ καλά με σχετικά καλές ενδείξεις. Πρόκειται για ένα διακόπτη μηχανισμού καστάνιας με ρελέ ρευματώθησης (πιέζουμε για να ανοίξει και ξαναπιέζουμε για να κλείσει) Δύο προτάσεις βελτίωσης που θεωρώ ότι πρακτικά θα βοηθούσαν τον χρήστη, είναι να προστεθεί στον διακόπτη οθόνη ενδείξεων (W,A,V) και στο λογισμικό η δυνατότητα αποστολής ειδοποίησης (μηνύματος), όταν συνδέεται και αποσυνδέεται φορτίο στο διακόπτη. Σύντομα θα εγκατασταθεί στον ηλεκτρικό πίνακα και θα επανέλθω με νεότερα. Προσοχή υπάρχει κίνδυνος ηλεκτροπληξίας. Η εγκατάσταση - συνδεσμολογία του διακόπτη θα πρέπει να γίνει από ηλεκτρολόγο. This does what it promises. I think, so far, that clever on a panel rail accessory with leak protection. I tested it with a 60W incandescent lamp. It works very well with relatively good indications. This is a ratchet switch with a electric push relay (push to open and press again to close). Two improvement suggestions that I think would practically help the user are to add to the switch the measurement screen (W, A, V) and to the software the ability to send a notification (message) when a load is connected and disconnected to the switch. It will soon be installed on the electrical panel and I will be back with newer ones. Caution there is a risk of electric shock. The installation - wiring of the switch should be done by an electrician.
10
Recommendations
Comments (7)

pipinos@BG183717431 ΣϵTeTETTTTl

pipinos 15/05/2021
Κάνει αυτά που υπόσχεται. Νομίζω, έως τώρα, ότι ποιο έξυπνο σε εξάρτημα ράγας πίνακα με προστασία από διαρροή. Το δοκίμασα με φορτίο μια λυχνία πυρακτώσεως 60W. Λειτουργεί πολύ καλά με σχετικά καλές ενδείξεις. Πρόκειται για ένα διακόπτη μηχανισμού καστάνιας με ρελέ ρευματώθησης (πιέζουμε για να ανοίξει και ξαναπιέζουμε για να κλείσει) Δύο προτάσεις βελτίωσης που θεωρώ ότι πρακτικά θα βοηθούσαν τον χρήστη, είναι να προστεθεί στον διακόπτη οθόνη ενδείξεων (W,A,V) και στο λογισμικό η δυνατότητα αποστολής ειδοποίησης (μηνύματος), όταν συνδέεται και αποσυνδέεται φορτίο στο διακόπτη. Σύντομα θα εγκατασταθεί στον ηλεκτρικό πίνακα και θα επανέλθω με νεότερα. Προσοχή υπάρχει κίνδυνος ηλεκτροπληξίας. Η εγκατάσταση - συνδεσμολογία του διακόπτη θα πρέπει να γίνει από ηλεκτρολόγο. This does what it promises. I think, so far, that clever on a panel rail accessory with leak protection. I tested it with a 60W incandescent lamp. It works very well with relatively good indications. This is a ratchet switch with a electric push relay (push to open and press again to close). Two improvement suggestions that I think would practically help the user are to add to the switch the measurement screen (W, A, V) and to the software the ability to send a notification (message) when a load is connected and disconnected to the switch. It will soon be installed on the electrical panel and I will be back with newer ones. Caution there is a risk of electric shock. The installation - wiring of the switch should be done by an electrician.
10
Comments (7)