WHdj
Q: How exact can you save the temp input ? The top temp. as well as the low temp., also 0,1C ?
Asked by WHdj on 2022-06-09 03:14:58
Q: is it useble for a fridsh at -20 C ?
Asked by WHdj on 2022-06-09 03:30:53
Parfus Environmental requirements: -10-60°C, humidity 20%-85%RH
2022-06-13 05:00:17 Helpful (2)Q: whatt is the max output off this devise?
Asked by WHdj on 2022-06-09 04:02:24
BG398119240 12a 24 volt
2022-09-18 07:24:53 Helpful (0)Q: Capaciteit: 40-60 ???? kan je er dan 40-60 mm dikke staalplaat mee snijden ???
Asked by WHdj on 2018-11-09 10:55:20
jgtron ok
2019-09-25 02:01:53 Helpful (1)
Q: Hoe moet Ik de lucht of elektriciteit aansluiten ?
Asked by WHdj on 2019-01-10 10:49:33
json U moet kabel gebruiken
2019-01-21 09:21:34 Helpful (0)Q: how can i connect air and electricety on this ? because it has only one connectionpiont.
Asked by WHdj on 2019-01-10 08:18:47
Abear This is the head of the gun, and the cable is needed. The cable can be directly connected to the equipment.
2019-01-20 09:38:39 Helpful (0)Q: How manny air will be needed for one minute use ? Air consumtion per minute is ..... ltr/min.
Asked by WHdj on 2018-12-10 12:24:09
Mcfanman not sure about that
2018-12-10 08:19:30 Helpful (0)Q: output is 0-220 volt alternating currend ????
Asked by WHdj on 2018-11-19 01:11:14
clks07 Yes.
2018-11-27 10:08:26 Helpful (0)Q: input is 220 volt alternating currend ????
Asked by WHdj on 2018-11-19 12:56:40
clks07 Input voltage: AC 220v±10%
2018-11-27 10:07:41 Helpful (0)Q: also avalleble with a eur connector at the input ????
Asked by WHdj on 2018-11-19 12:45:32
clks07 No, error connector is not available.
2018-11-27 10:02:58 Helpful (0)Q: speedrange ???? 0-220rpm ?????????
Asked by WHdj on 2018-11-19 12:41:32
clks07 Well, it is a mistake~
2018-11-27 09:53:36 Helpful (0)Q: what is the cutting thickness in steel you can cut with it ?
Asked by WHdj on 2018-11-17 12:29:31
Brunovs If the current is 60A, the cutting thickness is 10-15mm
2018-11-21 09:05:05 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
.JPG)
gatis242 Fj
2024-03-22 02:14:11 Helpful (0)